UIM24002 Stepper Motor Driver For UIM24002 Automatic Rolling Door

10 Pieces
UIM24002 Stepper Motor Driver For UIM24002 Automatic Rolling Door
Caratteristiche Galleria Descrizione di prodotto Richieda una citazione
Model Number: UIM24002
Motor Type: Stepper Motor
bipolar: parallel port
PMW chopper: constant current
Informazioni di base
Model Number: UIM24002
Termini di pagamento e spedizione
Packaging Details: export cartons
Supply Ability: 5000 Piece/Pieces per Month
Descrizione di prodotto

stepper motor driver

Optically Isolated Input Interface

UIM240xx controllers’ logic control inputs are all optically isolated. All opto-couplers share

one common anode (Vcc) as shown in above schematic diagram. Typically, Vcc is 5V.

However, 3.3V or voltages higher than 5V are also acceptable, so long as the current

through the opto-coupler’s emitter is between 5~20mA.

Automatic Current Reduction

UIM240XX controller is featured of Auto Current Reduction. If this function is enabled,
when the motor stops running, the phase current will be cut to 30% of the set value. As
soon as the motor goes back to working, the current will go back to the set value. This
function is enabled by turn the DIP1 (figure 0-4) to the ON position.

Prodotti raccomandati
Mettetevi in ​​contatto con noi
Persona di contatto : Bakey Fan
Caratteri rimanenti(20/3000)